Toro Titan ZX4875 Manuel De L'utilisateur page 50

Moving a Non-Functioning Machine (continued)
5. Disengage the parking brake by moving both motion-control levers down to the center,
unlocked position.
Note:
6. Move the machine as required.
Always push the machine by hand. Do not tow the machine, because towing may
damage it.
7. Move the motion-control levers outward to the P
8. Move both bypass levers rearward and over through the slotted hole to lock them in
place
Releasing the Mower-Deck Curtain
Loosen the 2 bottom bolts of the curtain to access the top of the mower deck.
Always tighten the bolts to connect the curtain after maintenance.
Maintenance: Pre-Maintenance Procedures
Do not start the machine.
.
IMPORTANT
position.
ARK
IMPORTANT
G453430
Page 5–4 3464-637 B