Kärcher K 5.540 Manuel D'utilisation page 7

Install the dosage regulator for detergent
STEP 5:

Insert detergent suction tube onto
the hose fitting.
Install the dosage regulator and
connect using 2 screws.
Note: During installation you must
make sure that the tongues of the
dosage regulator match up with the
intended recesses in the casing.
Download from Www.Somanuals.com. All Manuals Search And Download.
Install the high pressure hose drum
STEP 6:

Slide the free end of the coiled high
pressure hose through the recess-
es on the dosage regulator.
Insert the hose drum into the in-
takes on the transport handle.
Insert the axle of the hand crank
into the guides.
Rotate and press until the crank
locks in.
Install the holder bracket and se-
cure it using 2 screws.
7
English