7 - C
IV - Temperature settings
Your wine cabinet's temperature is adjusted at the control panel which contains the following features:
Cabinet
Hot circuit operating
temperature
indicator light (red)
display
Cold circuit operating
Infra-red "door open"
indicator light (blue)
detection sensors
To adjust the temperature of your 1-temperature cabinet:
• Press the
button and release it
immediately
The current set temperature is displayed
(the displayed figure flashes).
• When the displayed figure flashes you have
5 seconds to change the temperature setting
by pressing the
or
as appropriate, otherwise the display
automatically returns to the previous setting.
Recommended maturing setting range: 10 to 14°C (50° to 57°F)
• Press the
set button to confirm the new setting and the display will show the new setting.
The default setting is 12°C / 54°F (ideal maturing temperature). However, this setting can be adjusted between
5 and 20°C* (41° and 68°F*).
Beyond these limits, the buttons
*Converting your maturing cabinet into a service cabinet
You can use your 1-temperature maturing cabinet as a service cabinet in order to bring your white and red wine to tasting temperature
(setting range between 5° to 20°C / 41° to 68°F).
- White wines: recommended setting between 6° to 10°C (43° to 50°F),
- Red wines: recommended setting between 15° to 18°C (59° to 64°F).
This cabinet can therefore be used as a specific white or red wine service cabinet.
WARNING: to operate correctly your cabinet should be located in a room with a temperature between
0° and 35°C (32° and 95°F)
When making substantial changes to the temperatures it may take several hours to stabilise and display the required temperature.
OMMISSIONING YOUR WINE CABINET
a a - - 1 1 - - t t e e m m p p e e r r a a t t u u r r e e m m o o d d e e l l s s ( ( V V 0 0 8 8 3 3 - - V V 1 1 8 8 3 3 - - V V 2 2 8 8 3 3 ) )
Cabinet
temperature setting
buttons
Temperature
zone
concerned
button
and
are disabled.
Selection and
confirmation
button
• Temperature display: displays the actual temperature inside
your wine cabinet
• Adjustment buttons: enables the required temperature
inside the cabinet to be selected
• Indicator lights: display the operational status of the hot
(red) and cold (blue) circuits
Standby status
button
1 1 5 5
E E N N