Télécharger Imprimer la page

Eurocave Origine Serie Mode D'emploi page 30

Publicité

Les langues disponibles

Les langues disponibles

Origine_notice_2-GB.qxd
13/02/07
7 - C
III - Temperature setting
Setting the temperature of your wine cabinet can only be carried out using the remote control.
Radio signal
symbol
Temperature
display
Cold circuit
warning light
Select, set and
confirm keys
To set the temperature of your cabinet:
• Press
.
Select the temperature setting using the
Confirm setting by pressing on
The recommended setting range for maturing is 48°F to 59°F,
The default setting is 54°F.
To operate correctly, your cabinet should be located in a room with a temperature
between 32°F and 95°F
When there has been a significant modification in set temperatures, it can take several hours for your wine cabinet to stabilise and display the desired
temperature.
With no obstructions, the command radio signal can carry up to approximately 60m.
The distance of the radio signal is reduced if you put your remote control down
on a metal support.
You can refresh the data displayed on the remote control screen at any time by giving a prolonged press on
carried at approximately 10 min. intervals.
If
is flashing and the control panel displays "--", you have moved out of radio signal range, move closer to the wine cabinet.
IV - Setting the wine cabinet to standby mode
You can set your wine cabinet to standby mode at any time.
To do this, give a prolonged press on the
To reactivate your wine cabinet, simultaneously hold down the
12
12:13
Page 12
OMMISSIONING YOUR WINE CABINET
Temperatur
Sensor fault
alarm symbol
Hot circuit operating
warning light
Low battery
warning light
Wine cabinet number and
remote control number
display
and
buttons.
for several seconds, the temperature is then displayed.
and
, keys the display goes out and the wine cabinet is shut down.
• Temperature display: Displays the actual temperature inside
your wine cabinet.
Updates automatically every 10 min.
• Set button (+/SET/-): enables you to select the desired
temperature inside the cabinet.
and
keys until the temperature display lights up.
or
. Automatic refreshing is

Publicité

loading

Ce manuel est également adapté pour:

Origine v180Origine v100