Eurocave Origine Serie Mode D'emploi page 26

Origine_notice_2-GB.qxd 13/02/07
5 - I
II - Door reversibility
a - Parts summary
1 • 2 • 3 • Grommets
3 • Torx screws 25
4 • Hinge
5 • Pivot
b - Door reversibility
(solid and glass)
Your wine cabinet door is reversible. In this way you can change
which way it opens.
• Close the door
• Gently lay down your wine cabinet, always on the lateral face on
the electrical lead side.
• Gently remove the grommets (1-2) using a non-folding blade, see
Fig 1.
• Unscrew the three screws using a "T25" Torx wrench.
• Remove the upper hinge (4).
• Replace the pivot and the 1
• Remove the lower hinge (7) and position it on the other side of
the door, see Fig. 2 et 3.
• Lift the door from the body by opening it slightly
• Position the upper hinge on the other side, see Fig. 4.
• Replace the door in line
• Put the hinge into place using the screws, so that the door is
exactly in line with the body
• Check that the seal is adhering correctly to the body (by closing
the door)
• Replace the grommets
• Put your wine cabinet back at a vertical position
• Wait 48 hours before plugging in
8
12:13 Page 8
NSTALLING YOUR WINE CABINET
st plug grommet.
X 3
X 3
2
Fig. 1
6
Fig. 2
Fig. 3
1
3
4
Fig. 4
X 3
1
3
4
5
7
2