Publicité
Les langues disponibles
Les langues disponibles
- Install the drip tray (which you will find inside your cabinet's «accessories» box) on the compressor
support at the back of the cabinet, locating it under the small pipe protruding from the housing, the
lower part of the tank being placed under this pipe (see diagram opposite).
- Take the power lead (which you will find inside your cabinet's «accessories» box) and connect it to
the socket provided at the rear bottom left of the cabinet (see diagram opposite).
- Unwind the power supply lead so that it can be accessed and place the appliance leaving a space
between 8 and 10 cm (3" 1/8 to 4") space between the wall and the back of your wine cabinet.
- Place the power supply lead so that it is not in contact with any of the appliance's components.
- IMPORTANT - Wait 48 hours before switching on to allow the fluids contained in the internal
circuits to settle.
- Gently incline the wine cabinet backwards in order to adjust the front feet (screw adjustment) so
that your wine cabinet stands perfectly level (we recommend using a regular spirit level).
- Remove the protective items located inside your wine cabinet.
- Install the carbon filter, which you will find inside your cabinet's «accessories» box , by placing it in
the air circulation hole located inside the cabinet on the top left hand side (see diagram opposite).
- Beware: any changing of the control panel LED should only be carried out by a qualified
electrician.
- Never connect several wine cabinets to a multi-socket and do not use an extension cord.
NB.: when moving your wine cabinet, do not incline it more than 45°, and always towards
6- LAYOUT - STORAGE
Your EuroCave cabinet was designed to accept more than one type of storage shelf. Depending on the model, it adapts to your
requirements and different types of shelves can be added:
I - Different types of storage shelves
Your empty Dual Zone contains a fixed storage shelf (compartment separator
shelf) and a small 6 bottle sliding shelf at the bottom of the cabinet. The
configuration of your cabinet can be changed to suit your requirements.
Refer to page 44 to see some examples of storage layouts.
II - Wine cabinet layout advice
Your EuroCave wine cabinet was designed to safely hold a maximum number of bottles. We recommend that you follow the
advice below in order to optimise storage.
- Ensure that you distribute your bottles as evenly as possible over the various shelves in your cabinet to ensure even weight
distribution. Also make sure that your bottles are not touching the back wall of the cabinet.
- Also ensure that you distribute your bottles evenly over the height of the wine cabinet (loading all bottles at the top or all
bottles at the bottom should be avoided).
- Ensure that you pay attention to the instructions specific to your cabinet model with regard to storage, and never stack bottles
on a sliding shelf.
-6-
side where the power lead is located.
Bordeaux storage shelf
Ref: AXBH
Capacity: 78 bottles
Max. weight: 100 kg
Display shelf
Ref: ACPH
Capacity: 22 bottles
Sliding serving shelf
Ref: ACVH
Capacity: 20 bottles
Universal storage shelf
Ref: AXUH
Capacity: 77 bottles
Max. weight: 100 kg
Magnum sliding shelf,
fitted with the
"Main Du Sommelier"
Ref: ACGMS
Capacity: 7 bottles
Articulated
presentation kit
Ref: AOPAH
Capacity: 32 bottles
Universal sliding
shelf, fitted with the
"Main du sommelier"
Ref: ACMS
Capacity: 12 bottles
(13 Bordeaux bottles)
Publicité
