Télécharger Imprimer la page

Eurocave professional DualZone D290 Mode D'emploi page 18

Publicité

Les langues disponibles

Les langues disponibles

4 - ENVIRONMENTAL PROTECTION
Disposal of packaging:
The packaging components used by EuroCave are made out of recyclable materials.
After unpacking your cabinet, take the discarded packaging, the majority of which is recyclable, to a refuse
collection point.
Recycling: a caring gesture
Electrical and electronic equipment have potentially hazardous effects on the environment and public
health due to the presence of noxious substances.
You should therefore never trash electrical or electronic equipment along with unsorted municipal
waste.
When buying a new EuroCave product (Wine cabinet, cellar conditioner, Vin au Verre), you can entrust the recycling of your
old appliance to your EuroCave dealer.
Speak to your EuroCave dealer; he will explain all the collection and disposal resources that have been set up within the
EuroCave network.
To comply with environmental protection legislation, your wine cabinet does not contain C.F.C gases.
Power saving:
- Install your cabinet in an appropriate location (see chapter 5) which provides the recommended ambient temperature
ranges.
- Do not keep the door open any longer than necessary.
- Make sure that the door seal is not damaged and seals correctly. Contact your EuroCave (or Around Wine) dealer if
damaged.
N. B.: Respect the environment: when replacing your wine cabinet, enquire about your local waste disposal services and use
the correct recycling procedure. Some substances and parts contained in EuroCave wine cabinets, particularly the refrigeration
gases, use recyclable materials that require special disposal procedures.
If the door has a lock, remove the lock so that children cannot become trapped inside the cabinet.
Place unusable appliances out of use by unplugging them and by cutting the power lead.
5 - INSTALLING YOUR WINE CABINET
- On unpacking you wine cabinet after delivery, check for any obvious exterior damage (dents, malformation, etc.).
- Open the door and check that the inside of the appliance is complete and in good condition (walls, shelves, hinges, control
panel, etc.).
- In the event of a problem, contact your dealer.
- Move your wine cabinet to your selected location. This location should
> not be a confined space. There should be space to allow air to flow around the cabinet. (not placed in a cupboard, etc.)
> away from any heat source
> not too wet (wash room, utility room, bathroom, etc.)
> be on a flat solid floor
> have an electrical power supply (standard 16A plug connected to a 30 mA* circuit breaker)
* not applied to certain countries
- Never place your wine cabinet in a location liable to flooding.
- Avoid splashing water onto the base of the appliance.
- Place the clay humidity cassette (for 1 temperature models only), which you will find inside
your cabinet's «accessories» box) in the receptacle provided for it beneath the grid located
at the base of the cabinet (see diagram page 20). When using the cassette for the first time,
please soak the cassette for ten minutes in water, and let it drain.
AND POWER SAVING
-5-

Publicité

loading