Publicité
IMPORTANT - PLEASE READ
KEEP FOR FUTURE REFERENCE
Dear clients,
We are glad that you have chosen this premium product made of partly solid wood. We, the Pinolino staff, have manufactured this
item with greatest care. In doing so, we have exclusively used European timbers from certified forest stands. The varnishes and
glues that were used are eco-friendly and comply with the strict European safety standards.
To spare you unnecessary effort, carefully read the assembly instructions first. Check whether you have all the parts and study the
illustrations carefully before you start the assembly. Improper handling or assembly and especially construction alterations will
void all warranty claims.
Removable bars:
One of the side parts has three mobile rails which can be removed. We refer to those rails which have at both ends plastic bushings
that are secured in the beam by means of a spring. The rounded beam, wider and fitted with springs for the mobile rails is installed
on the topside. To pull off the mobile rails, they have to be pushed upwards until the other end comes out from the inferior beam.
The same is done in order to put them back.
Safety requirements:
Please check regularly that the screws are well tightened. The screws can loosen, leading to snag points or objects getting caught.
The mattress support has three height positions. Please make sure that the mattress support is set in the right position, so that the
child will not fall out of the cot. The lowest position is the safest position. As soon as the child can sit up, the mattress support
should only be used in this position.
Please use only the enclosed hex key and a screwdriver for the assembly. To avoid damaging the product, do not use an electric
screwdriver for tightening the screws!
Please note:
Use only original accessories and spare parts from the producer or from the providers. Plastic bags and other plastic elements /
wrappings should be removed immediately and kept out of the reach of children!
Assembly instructions:
Please take into consideration that the parts should be assembled on an even, flat surface. Make sure that the article is not inclined.
In order to protect the article and the floor, we recommend using the packaging of the article as underlay during the assembly.
Warning:
Do not use the cot if single parts are missing, broken or torn. Use only original spare parts recommended by Pinolino. To prevent
the child from falling out, the cot should no longer be used if the child is able to climb out of the cot.
Warning:
Objects that can serve as footholds, or ones that present the hazard of suffocation or strangling, e.g. laces, drapery or curtain cords
etc., must not be left inside the cot.
The mattress must be chosen so that the depth of the cot (mattress upper surface to top edge of the bed frame) will be at least 50 cm
in the lowest position of the mattress support and at least 20 cm in its highest position. The mattress size should be 140 cm x 70 cm,
or at least 139 cm x 68 cm. The maximum thickness of the mattress for this bed must be 10 cm.
Warning:
Never use more than one mattress in the cot.
Warning:
The size of mattress must ensure that the gap between the mattress and the side ends is no more than 30 mm, however the
mattress is positioned.
4
CAREFULLY! -
Publicité
