TechniSat DIGITRADIO 586 Notice D'utilisation page 51

Les langues disponibles

Foreign bodies, e.g. nails, coins, etc. must not be allowed to fall inside the

device. Do not touch the connection contacts with metal objects or your

fingers. This may cause a short circuit.

This device is not intended to be used by people (including children) with

limited physical, sensory or mental capacities or lack of experience and/

or knowledge, unless they are supervised by a person responsible for their

safety or they have been instructed by them as to how to use the device.

Never allow children to use the device unsupervised.

Modifications to the device are prohibited.

The CD player uses an invisible laser beam. If used incorrectly, this can injure

your eyes. Never look directly into the open CD compartment.

This device has been classified as a CLASS 1 LASER.

WARNING! Implanted medical devices

Medical device manufacturers recommend a minimum distance of at least 16

cm between radios and implanted medical devices, such as pacemakers and

implantable cardioverter defibrillators, to avoid possible interference with the

medical device. Persons who rely on such devices should always maintain the

minimum distance of 16 cm between the medical device and the wireless

charging pad. Switch off the DIGITRADIO 586 if there is any reason to believe

that interference may occur. Follow the manufacturer's instructions for the

implanted medical device. If you have any questions regarding the use of the

wireless charging pad together with an implanted medical device, consult

your physician.

4 Disposal

The device packaging is comprised exclusively of recyclable materials. Please sort

these and take them to a "Dual System" recycling facility. This product is identified

according to Directive 2012/19/EU on Electrical and Electronic Waste (WEEE) and,

at the end of its service life, must not be disposed of with normal domestic waste. It

must be taken to a collection point for recycling electrical and electronic devices.

The

symbol on the product, the instruction manual or the packaging indicates this.