Audio input
You can play back the sound from an external device via the loudspeaker of the SUPERCD.
Connect the external device to the AUX-IN connector (3.5mm stereo jack) on the rear panel
>
>
Select the audio input with the MODE button. The display shows [Aux-In].
Control and playback is done on the external device. Do not set the volume on the playback device too low to avoid noise
disturbances.
Advanced functions
Sleep function
Press the MENU button and then select [Main Menu > Sleep].
>
>
Use the or buttons to set in steps of Sleep off, 15, 30, 45, 60 minutes to set the time period after
which the device switches to standby in each mode.
Alternatively:
>
Press the SLEEP button several times.
A clock symbol appears in the status bar of the display with the time remaining until the SUPERCD switches
to standby.
Alarm
Press the MENU button and then select [Main Menu > Alarm].
Alternatively:
Press the ALARM button on the device to directly start the alarm configuration.
>
65