Publicité
Les langues disponibles
Les langues disponibles
Bluetooth
Activating Bluetooth mode
Press the MODE button repeatedly until [Bluetooth Audio] is shown in the display.
>
Alternatively:
>
Press the MENU button and then select [Main Menu > Bluetooth].
In the status bar of the display, a flashing [BT] signals pairing mode.
If the SUPERCD has already been paired once with another device that is within range the
connection is established automatically.
Pairing
>
Activate Bluetooth on your music player, e.g. a smartphone or tablet.
For information on how to activate Bluetooth on your music player, please refer to the corresponding operating
instructions of the device you want to pair with the SUPERCD.
Please note that only 1 device can connect to the SUPERCD at a time.
Be careful not to exceed the maximum Bluetooth range of 10 metres to ensure proper playback quality.
>
On your music player, select the list of Bluetooth devices found.
Find the entry SUPERCD in the list and select it. If you are asked to enter a PIN, enter "0000" (4x zero).
>
When pairing is successfully completed, [BT] will stop flashing on the REVO Radio display.
>
Playing music
>
Select a music track on your music player and play it.
>
The sound is now played back via the SUPERCD.
You can control playback on your music player using the playback buttons on the REVO radio remote control
(compatible devices only).
To pair a new device with the SUPERCD, you must first disconnect the old device. You can either start this on the external device
or select MENU > [Setup Bluetooth]. The SUPERCD is now in pairing mode again.
64
Publicité
