Télécharger Imprimer la page

Revo SuperCD Mode D'emploi page 61

Masquer les pouces Voir aussi pour SuperCD:

Publicité

Les langues disponibles

Les langues disponibles

DAB+ radio
Stations whose signal strength is below the required minimum signal strength do not send a sufficient signal. Align the antenna.
Pressing the INFO button several times toggles through various information, such as programme type, multiplex name,
frequency, signal error rate, data bit rate, programme format, date (depending on the active source).
Dynamic Label Plus
If it is supported by the programme provider, the Dynamic Label Plus service allows, for example, the name of the current
programme or the title and artist to be displayed in addition.
Setting DRC
The compression rate compensates for dynamic fluctuations and associated volume variations.
Press MENU and select > [DRC] to select the desired compression rate
>
>
To select the compression rate use:
DRC high - high compression
DRC low
DRC off
>
Confirm by pressing SELECT.
Deleting inactive stations
Press MENU and use  or  to select > [Prune invalid].
>
>
Confirm by pressing SELECT.
Press  or  to select > [Yes] and press SELECT to confirm.
>
Adjust station order
>
Press MENU and then press  or  > [Station order].
Select a sorting type with  or  and confirm your selection with SELECT.
>
You can choose between: Alphanumeric and Enseble.
- low compression
- compression switched off.
.
61

Publicité

loading

Produits Connexes pour Revo SuperCD