Fig. 9
A
B
Place the gasket (Fig. 9 A) from the bag of screws around
1.
the edge of the flue pipe and push it into the smoke outlet
(Fig. 9 B).
4.5 Mounting side panels
Steel side panels
Fig. 10
Fig. 11
Fig. 12
If rear outlet: Use proper tool to remove the cover
1.
plate (Fig. 10 A) in the side panel (Fig. 10 B).
Lift the side panel and lower it over the bolts (Fig. 10 C
2.
and Fig. 12).
3.
Mount the other steel side panel the same way.
B
A
C
C
Fig. 11
A
Mount the pins (Fig. 11 A) and the clips (Fig. 11 B).
1.
Join the two side panels together using a clip (Fig. 11 C).
2.
3.
If rear outlet: Mount an extra clip in the lower part of
the opening (Fig. 11 D).
Fig. 12
1.
Mount the nuts from inside of the base.
Fig. 13
1.
Place the top plate (Fig. 13 A), air grate (Fig. 13 B) and
bowl (Fig. 13 C).
ENGLISH
C
B
D
C
B
A
7