Designated Use And Technical Data; Pewag Levo Hook; Battery; Radio Control - pewag levo hook LH Manuel D'utilisation Original

4. Designated use and
technical data
levo hooks are designed exclusively for the lifting and
transporting of loads, which may be lifted and lowered via radio
control. The system is a connecting link between the crane
hook and the load and/or the lifting device.

4.1 pewag levo hook

Load
The hook may only be loaded at the bearing area and in a
vertical direction (fig. xx), with the maximum load capacity as
specified on the identification plate.
Fig. 1: May only be loaded in a vertical direction
Operating temperature:
The long-term permitted operating range for the basis set is
-20°C to +60°C (-4°F to 140°F).
Shock-loading
The hook may only be loaded vertically and must not be
subject to shock-loading. Collisions of the suspended hook
of any kind (when under load or when not under load) are not
permitted.
Protection class
IP 65 (except for radio control, charging station and multi-
adapter)
Safety factor against break:
4:1 or 5:1 (Japan)

4.2 Battery

Nominal voltage 29.6 V
Capacity 3.4 Ah
Energy content 100.64 Wh
Weight 0.57 kg
Cell type Li-Ion, rechargeable
Temperature control Yes
Deep discharge protection Yes
Overcharge protection Yes
Working temperature -20°C to +60°C /
-4 °F to +140 °F
F
F

4.3 Radio control

Frequency 868 MHz (Europe), 915 MHz (USA)
Range 100m
Battery Button battery type CR2032, 3 V
Certification ETSI (Europe), FCC (USA)
Transmittance Encoded AES 128 bit
4.4 Charging station and
multi-adapter
Operating voltage 115/230 V
Fuse Microfuse 10 A, slow
Multi-adapter Maximum 10 in line

4.5 Labelling and identification

On the casing side of the pewag levo hook, there is an
identification plate with the following information:
• Model
• Year of construction
• Serial number
• Load capacity
• Safety factor
• CE marking
• Manufacturer
The information on the identification plate must be legible at all
times.
EN
pewag levo hook LH
27