Etac Molift Air 500 Manuel D'utilisation page 13

Transfer - disconnected transition coupling
Do not perform any transfer of user before you have checked the
following:
Both gates ① are visible (transition coupling unit seen from
below).
①
Pin ② must not be visible when coupling is disconnected.
Push traverse rail in the desired direction.
To connect
Before connecting the transition coupling units, ensure trolley is
min. 0.5 m away from transition coupling.
Push the traverse rail towards the stationary rail, so the transition
coupling units connect, and you hear a sound.
②
Transfer - connected transition coupling
Do not perform any transfer of user before you have checked the
transition coupling units are completly locked together. Pushing
the rails apart by hand must be impossible.
The user can now be transferred from one rail to another.
10
Molift Air 500 / BM16099 Rev F / www.etac.com
Click