Hettich ROTOFIX 46 Mode D'emploi page 58

Commissioning
5 Commissioning
5.1 Unpacking the centrifuge
16 / 39
5
1
4
2
4
Fig. 13: Transport lock
1 Screws
2 Motor cover
3 Bellows
4 Transport lock
5 Screws for transport lock
1. Open the lid.
2. Unscrew the motor cover ( ).
3. For ROTOFIX 46 H:
Remove the bellows ( ).
4. Screw in 3 screws ( ) with 3 transport locks ( ).
5. For ROTOFIX 46 H:
Insert the bellows ( ).
6. Turn over the motor cover ( ) and insert it.
7. Screw in 4 screws ( ).
CAUTION
Danger of crushing due to parts falling out of the transport
packaging.
−
Keep the device balanced during the unpacking
process.
−
Only open the packaging at the points provided for this
purpose.
CAUTION
Risk of injury from lifting heavy loads.
−
Provide an adequate number of helpers.
−
Note the weight. See ⮫
on page 9 .
Rev.: 09 / 11.2023
3
Chapter 3.1 'Technical data'
AB4600en
1
2