Publicité
Les langues disponibles
Les langues disponibles
Device overview
Fig. 9: [Preheating] button
Fig. 10: [RCF] button
Fig. 11: [SELECT] button
Fig. 12: [START/IMPULSE]
button
3.6
Original spare parts
3.7
Scope of delivery
3.8
Returns
14 / 39
■
Start preheating.
■
The preheating speed is adjustable. It is preset to 500 RPM.
■
Toggle between RCF indicator and RPM indicator.
■
The RCF is displayed in brackets ñ á.
■
Selecting the individual parameters.
■
Scroll forward in the menus.
■
Start centrifugation run.
■
Short-time centrifugation. The centrifugation run takes place as long as
the button is being pressed.
■
Save entries and changes.
Use only original spare parts from the manufacturer and approved accesso-
ries.
The following accessories are supplied with the centrifuge:
■
1 grease for the trunnions
■
1 Hex key (5 mm x 170)
■
1 right-angled hex key (2.5 mm)
■
1 6-lobe (Torx) pin key wrench, short (T20 SG)
■
1 power cable
■
3 Cheese head screws M6 x 110
■
3 Spacer rollers
■
3 Washer
■
1 Release pin
■
1 user manual
■
1 instruction sheet, transport lock
Rotors and the corresponding accessories are supplied depending on the
order.
An original Return Material Authorisation (RMA) form from the manufacturer
must always be requested for a return. Secure and reliable acceptance and
booking in of the goods with the manufacturer is not possible without an
original RMA form from the manufacturer. The Return Material Authorisation
(RMA) form contains a Declaration of No Objection (UBE), which must be
completed in full and enclosed with the return.
Rev.: 09 / 11.2023
AB4600en
Publicité
