Publicité
Les langues disponibles
Les langues disponibles
HOW TO SET THE APPLIANCE
FOR SURFACE COOKING
" The surface e!ernents may be hot even when Off and burns can occuri Do not touch
c_uT,oN the surface e!ements until they have cooled d0wn sufficient!y,
, At high or medium:high settings, never leave food unattendedl Boilovers cause
®
Be sure you turn the c0ntr01 knob to OFF when you finish c00kingl
Single surface unit control
knob (left rear, right rear)
1. Push the knob in.
2. Turn in either direction to the setting you want.
• At both the off and high settings, the knob clicks into
position.
•oOo
o ooo o"
Bridge surface unit control
knob (left front)
1,
2.
Push the knob in.
Turn in either direction to the setting you want.
,, To use the single surface unit, turn the control knob
to the single burner setting.
To use the bridge surface unit, turn the control knob
to the bridge burner setting.
O.OOO
Triple surface unit control
knob (right front)
The triple surface unit has 3 cooking sizes to select from
so you can match the size of the cooking area to the size
of the cookware you are using.
1. Push the knob in.
2,
Turn in either direction to the setting you want.
To use the large surface unit, turn the control knob
to the large burner (A} settings.
To use the middle surface unit, turn the control knob
to the middle burner (B) settings.
To use the small surface unit, turn the control knob
to the small burner (C} settings.
OOO.O
!ii ii
If you removed knob for cleaning, insert it after check to direction. (refer to above figure)
English - 36
Publicité
