Publicité
Les langues disponibles
Les langues disponibles
How to replace the door
1,
2.
Firmly grasp both sides of the door at the top.
With the door at the same angle as the removal position, slide the indentation of the hinge arm
into the bottom edge of the hinge slot. The notch in the hinge arm must be fully inserted into
the bottom of the slot.
arm
3,
Bottom
Indentation
edge of slot
Open the door fully. If the door will not open fully, the indentation is not inserted correctly in the
bottom edge of the slot.
4. Push the hinge locks up against the front frame of the oven cavity to the locked position.
ii
Hinge lock
5. Close the oven door.
REMOVING
AND REPLACING
THE WARMING
DRAWER
CAUTION
How to remove
the warming
drawer
1,
2.
Pull out the drawer until it stops.
Locate the locking clips near the back of each full-extension roller guide rail. Using two hands,
push down on the left clip and lift up on the right clip to release the clips. Pull the drawer the
rest of the way out.
English - 72
Publicité
