Publicité
Les langues disponibles
Les langues disponibles
Location
of the radiant surface elements
and controls
The radiant control knobs operate the radiant surface elements on the cooktop as shown below.
1. Left Front: 7", 1,800 W
(Bridge 2,600 W)
2. Left Rear: 7", 1,800 W
3. Right Front: 6"/9"/12", 3,000 W
4. Right Rear: 6", 1,200 W
5. Warming Center: 100 W
6. Hot surface
indicator
Hot surface indicator
• Comes on when the unit is turned on or hot to the touch.
Stays on even after the unit is turned off.
Glows until the unit is cooled to approximately 150 °R
Cooking
areas
The cooking areas on your range are identified by permanent circles on the glass cooking
surface. For the most efficient cooking, fit the pan size to the element size.
Pans should
not extend more than 1/2"to 1-beyond
the cooking
area.
When a control is turned on, you can see a glow through the glass cooking surface. The
element will cycle on and off to maintain
the preset heat setting, even at high settings.
• For more information on selecting proper types of cookware, refer to the section "Using the
proper cookware" on page 38.
English - 35
Publicité
