Tristar AC-5493 Manuel D'utilisation page 19

Regulating the air flow direction
The cooling capacity of the unit depends on the following factors:
• All windows and doors must be closed, otherwise the hot air will stay flowing inside .
• If the room temperature is not extremely high and for example, there are many
heat sources in space, such as computers etc.
• Are the dimensions of the area suitable for this device?
The cooling capacity for the AC-5493 is maximal 50 m3 and the cooling capacity for the
AC-5494 is maximal 63 m3.
• Is the heat discharged outwards properly
• Make sure the filters are cleaned regularly.
Cleaning
Always remove the plug from the socket when the device is cleaned.
Clean the outside with a damp cloth. Never use harsh and abrasive cleaners, steel wool or a
scouring pad as this will damage the device. Do not immerse in water or other liquid.
Remove filters from the device and clean it with warm soapy water, let the filters dry
completely before being replaced. Turn the appliance without filters. If the unit is stored after
the season, drain the condensate water and put the cord on the cord storage area (No. 7).
Turn the vertical louvers left and right by moving the roller on
the air vent. For horizontal louvers, adjust them up and down by
hands directly to control the air flow direction.
19