Tristar AC-5493 Manuel D'utilisation page 14

Operation and maintenance
Remove all packaging of the device.
Check if the voltage of the appliance corresponds to the main voltage of your home.
Rated voltage : AC220-240V 50Hz. This device is not suitable for outdoor installation or use.
When fixed or moved, the device can not be set horizontally or declined to more then 45° or
upside-down. The refrigerant circuit is checked for leak tightness.The cooling capacity is 7.000
BTU/ 2051 watt (AC-5493 model) or 8500 BTU/2491 watt (AC-5494 model).
Before use
Place the appliance on a flat stable surface and hold at least 30 cm. free space around it.
Make sure the unit is placed in a upright position.
Let the unit, after transport, wait for more than 4 hours befure it is plugged in into the walloutlet.
Prevent the cabinet to get wet.
Make sure the power cable to the power plug is not curled up on the back of the device, it can
be too hot. Place the plug always into a grounded outlet.
Never place the appliance near any heat sources or direct sunlight.
Installation of the carbon filter (No. 18)
.
1
Remove the air filter frame (No. 8)
from the unit.
2
Separate the filter holder from the
filter frame.
3
Remove the carbon filter (No. 18)
from its plastic bag.
4
Insert the carbon filter into the
filter frame.
5
Fix the filter by reassembling the
fixer onto the filter frame.
6
Re-fit the filter frame inside the
unit.
14
UK