Télécharger Imprimer la page

Haojue EG150 2019 Manuel D'utilisation page 40

Publicité

Les langues disponibles

Les langues disponibles

(40)
Haojue EG150 99011H11A81H000 V02 EN+FR 2019-4-24
inspection should be made by an authorized dealer.
BWARNING
Brakes are extremely important parts for safety
of both rider and passenger, so they should be
inspected and adjusted often.
BWARNING
In case the braking system should need to
be serviced, we strongly recommend that you
EN
consult with an authorized dealer.
complete tools, great skills and the safest and most
economical methods.
The following brake items should be checked daily
1. Operate the front and rear brakes to inspect if they are
flexible.
2. Inspect the wear conditions of the brake shoes.
3. Inspect the free strokes of the front brake and the rear
brake.
FRONT BRAKE (DRUM BRAKE)
Adjustment of front brake lever
Free stroke 2 of the brake handle refers to the stroke
(40)
Haojue EG150 99011H11A81H000 V02 EN+FR 2019-4-24
between the free position of the brake handle and the
position of the brake handle when it is grasped to make
the front wheel begin to brake.
When adjusting the free stroke 2 of the brake handle,
remove the rubber bush 1 along the cable and turn the
adjusting nut 5 on the front brake. When doing a fine
adjustment, loosen the nut 3, adjust the screw 4, and
operate the front brake handle to make the free stroke 2
3–5mm. After the adjustment, lock the nut 3 and fit the
rubber bush 1.
NOTE: If follow the steps, the free stoke is not required,
They have
please have it checked by the authorized dealer.
Wear limit of front brake
There is a wear limit mark on
the front brake of the motorcycle.
Inspect the wear situation of the
front brake following the essentials
below.
1. Inspect whether the braking
system
adjusted.
2. Operate the braking system and inspect and make
sure the mark extending line 1 is in the allowed range
3 (see the figure) marked on the wear limit mark
2, otherwise have the component in the front brake
replaced by a qualified distribution and maintenance
organization for safety.
38
extending line is in
has
been
properly
the allowed range
The mark

Publicité

loading