Teuco Coralya 543 Manuel D'installation page 9

7
ASSEMBLING THE PANELS - panelled tubs only
MOUNTING PANELS WITH SCREW FIXINGS
On completion of connections, replace the previously removed panels in the following order: 1, 2, 3.
Position the panel to the bathtub and clip the top edge of the panel into place between the springs (M) and the edge of
the bathtub.
Raise the panels using the wedge (A) provided.
Secure the panels with the screws and collars (B).
Fit the screw covers (C).
ADJUSTMENT OF THE FIXING BRACKETS
If the panels do not fit correctly together (see design), remove the panels and adjust the springs (F) and move the brack-
ets (G) into the correct position. Remount the panels as indicated previously.
YES NO
YES NO
M
C
F
G
B
A
B
C
A
C
F
G
9
EN