Télécharger Imprimer la page

Kenmore ELITE 110.2206 Serie Guide D'utilisation Et D'entretien page 14

Publicité

Les langues disponibles

Les langues disponibles

Rinses
Rinsing is accomplished
in the same manner as washing.
Fresh water is added to a slow spinning load. Then the load
moves through the spray rinses. The water is then drained
away and the rinsing process is repeated. The number of
rinses varies depending
on the cycle.
During the last rinse, fabric softener is dispensed
into the
bottom of the tub and applied to the load.
Final Spin
The last of the rinse water is drained and the load is spun.
The amount of spinning depends on the cycle selected.
To make unloading easy the load is peeled off the sides of the
basket by the CALYPSO ®wash motion.
Normal Washer
Sounds
As with any new product, you will hear sounds that you are not
accustomed
to. During the wash, rinse, and final spin cycle,
higher spin speeds create unique sounds you probably haven't
heard from your conventional top loading washer. Between
changes in wash actions, there will be momentary pauses. You
will hear water spraying and splashing during the wash and rinse
cycles. These new sounds and pauses are part of normal washer
operation. See "Troubleshooting."
Use this feature to select the desired prewash and rinse options
for your wash cycle.
PREWASH
OPTIONS
Select a prewash option to ensure thorough cleaning of your
heavily soiled and stained loads.
o SATLIR£!_'D SOAK
oSA)_
TRAT
PREWASH
SATU RATED SOAK
Use this option for set-in stains and soil that need extra time for
removal. Soaking in this washer is different than in a conventional
washer. The washer sprays the load with water and detergent for
4 minutes at extra low spin speed followed by a brief period of
wash action at the speed of the selected cycle. Then another
4 minutes of spraying and extra low spinning occurs. The wash
action then pauses for the detergent to work on the soils. The
SATURATED SOAK feature is followed by the selected cycle.
Using SATURATED SOAK will extend your wash cycle by
16 minutes.
STAIN TREAT
This option provides enhanced CATALYST_ Cleaning Action for
tough stains. The HEAVY DUTY and WHITEST WHITES cycles
automatically
include STAIN TREAT for total wash times of
23 minutes.
NOTE: Deselecting STAIN TREAT from the HEAVY DUTY and
WHITEST WHITES cycles will decrease the total wash times to
19 minutes.
STAIN TREAT may be selected as an option with other cycles.
See table for details.
Cycle
STAIN TREAT
HEAVY DUTY
Default (23 minutes total wash time)
NORMAL
Option
JEANS/COLORS
Not available
DELICATE/CASUAL
Option
ULTRA HANDWASH
Option
EXPRESS WASH
Option
WHITEST WHITES
Default (23 minutes total wash time)
BULKY ITEMS
Not available
WOOL/SILK
Not available
RINSE/SPIN
OPTIONS
Selecting this option allows you to choose a 2nd Rinse and
Extended Spin option. You may also select and run EXTENDED
SPIN and RINSE/SPIN without first selecting a cycle. RINSE/
SPIN is not available if a cycle has been selected.
_2H_
I%ISE
_ EXTEII/DEID SP)II/
I!R(NSE / S!:qN
OPT)OU/S
Press RINSE/SPIN OPTIONS until the indicator light next to the
desired setting glows.
2nd RINSE
Selecting this option provides a second rinse with the same
water temperature
as selected for the first rinse. A 2nd Rinse can
be added to any wash cycle.
EXTENDED SPIN
This option adds an additional 3 minutes of spin to any cycle to
reduce drying time and save energy. If you select EXTENDED
SPIN and do not select a wash cycle, you will get an 8 minute,
high-speed
spin.
RINSE/SPIN
Use this option to get a combination
of rinses and spins followed
by a high-speed
spin. The time display will include an estimate of
how long it will take to fill and drain the washer. Fabric softener
can be added to the fabric softener dispenser.
When to use Rinse/Spin:
For loads that need rinsing only.
For completing a cycle after the power has been off.
To add fabric softener to load.
To use or change Rinse/Spin
settings:
1. Add fabric softener to the dispenser (if desired).
2. Press the RINSE/SPIN OPTIONS control until the RINSE/
SPIN indicator light glows.
3. Press START.
14

Publicité

loading

Ce manuel est également adapté pour:

Elite 110.2408 serieElite 110.2506 serieElite 110.2508 serie