3.3 FITTING THE SEAT
3.4 FITTING THE GRASS-CATCHER
3.5 CONNECTING THE BATTERY
1.Put the battery upright in the battery compartment under the seat.
2. Secure the terminal of the red line to the positive terminal of the
battery.
3. Fix the black wire to the negative pole of the battery.
4. Put the battery down in the battery compartment
Page 120 de 160
Fit the seat (1) onto the plate (2)
using the screws
(3)
1. Insert the bin support rod (1) into the bin frame (2)
using a rubber hammer
2. Press down on the support rod to snap it into
place.
3. Attach the connecting rod (3) to the support rod
Attach the loop (4) to the support rod (1) in turn.