Publicité
Les langues disponibles
Les langues disponibles
LIGHTING
This section applies to units factory equipped with incandes-
cent lightbulb and selected appliances equipped with LED
lighting with E14 thread.
• Replace the light bulb
1. Set the knob to "OFF", then unplug the appliance.
2. Remove the bulb cover
3. Replace the bulb with one having identical parameters as
the factory installed bulb (E14 thread, 220-240V~, maximum
dimensions: 26 mm diameter, 55 mm length).
4. Replace the bulb cover.
5. Bulbs of a higher or lower power should not be used, only
use bulbs of the specification given above.
Note:
The light bulb must not be used for room illumination.
MAX 10 W
- 17 -
Publicité
