Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
r
4) Finally, toe kick brackets (o) are attached to the gaps
under the machine and the installation is completed.
INSTALLING THE OUTER DOOR (DEPENDING ON
MODEL)
As shown in Fig. 24 , you must measure the height and
depth of the cabinetry to determine the dimensions of the
outer door.
1) The installation plan is in the plastic bag secured to the
inside of the Dishwasher door.
NOTE
While securing the installation plan, make
sure that the plan adheres to the inside of
the door. When fastening is complete, the
installation plan must remain straight on the
outer door.
2) As shown in Fig. 24 , the screw hole is opened to the
outer door from the points marked on the installation
plan. Diameter of Drill Bit: 5/64" (2 mm) Depth of Drill Bit:
15/32" (12 mm)
22
870x1
880x2
890x3
900x4
s
870x1
880x2
890x3
900x4
s
r
Fig. 22
3) As shown in Fig. 25 , Screws
4) As shown in Fig. 25 , Wooden Door Fixing Strips are
14
Fig. 23
5) Before mounting the wooden door on the dishwasher,
6) The screws located on the wooden door are fitted to the
2
870x1
880x2
890x3
900x4
s
870x1
880x2
890x3
21.5mm) are installed in positions III.
900x4
s
installed in the positions shown in the figure.
NOTE
Before attaching the Wooden Door Fixing
Strips, remove the white papers from the
surface on both sides.
n
14
g
mount the handle on the wooden door as in Fig. 26 .
dishwasher at the discharges located on the door outer
sheet and are assembled as shown in Fig. 27 .
Fig. 24
5/32" x 27/32" (4mm x
n
g
Fig. 25
Publicité
