Bosch NIT5668UC Mode D'emploi page 15

Length of timer end signal
™‡
10 seconds*
‚
30 seconds
ƒ
1 minute
„
™ˆ Power Management function
= Off*
‹
= 1.000 W. minimum power
‚
.= 1.500 W
‚
= 2.000 W
ƒ
etc.
or
Š
Selection time for heating element
™Š
Unlimited*: You can adjust the settings of the last heating element used at any time without
‹
having to select it again.
Restricted: You can adjust the settings for the last heating element used within 10 seconds after
‚
selecting it. After that you will have to reselect the heating element before setting it.
Cookware, Checking result of cooking process
™‚ƒ
Not suitable
‹
‚ Not perfect
Suitable
ƒ
Reset to basic settings
™‹
Off*
‹
Reset the appliance to basic settings
‚
*factory settings
Changing the basic settings
The cooktop must be turned off.
Turn on the cooktop with the main switch.
1.
Within10 seconds, touch the Panel Lock key for about
2.
4 seconds.
The first four displays provide product information.
Touch the settings area to view the individual displays.
Product information
Directory for the Customer Service Index (TK)
FD number
FD number 1
FD number 2
Touching the Panel Lock key again takes you to the
3.
basic settings.
and blink alternatingly in the element display and
™ ‚
lights up on the timer display.
‹
. = maximum power of the element
Š
Display
‹‚
"š
Š†
‹
Touch Panel Lock repeatedly until the indicator for the
4.
desired function appears in the element display.
Use the
@
5.
appears in the timer display.
.
.
†
Touch Panel Lock again for 4 seconds. The setting is
6.
stored.
Quit basic settings
Turn the cooktop off with the main switch.
and keys until the desired setting
A
15