Télécharger Imprimer la page

Bosch NIT5668UC Mode D'emploi page 13

Masquer les pouces Voir aussi pour NIT5668UC:

Publicité

Les langues disponibles

Les langues disponibles

Cook time
You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
CAUTION
9
When using the timer, always keep an eye on the
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
This function should not be used for long periods
of time, especially at high heat settings.
Make sure the cooktop is turned off with the main
power switch after each use.
Setting the cook time
The cooktop must be turned on.
Select the desired element and power level.
1.
Touch the Timer key. The
2.
the element and
is shown in the timer display.
‹‹
Touch the + or - key in the timer display. The basic
3.
settings are displayed:
+ key = 30 minutes
- key = 10 minutes
Touch the + or - key to set the desired time.
4.
After a few seconds the timer will start to count down.
Changing or cancelling cook time
Touch the Timer key until the
the desired element. Adjust the cooking time using the
or
keys. To cancel cook time set the timer to
A
the
key.
A
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear a beep. The indicator
the element display and the timer display shows
10 seconds. The
Ú
indicator next to the element stays
on. Once you touch the Timer key, the indicators and the
beep are turned off.
Notes
If a cooking time was programmed for several
elements, the time information for the selected element
is shown in the timer display.
You can set a cooking time of up to 99 minutes.
indicators light up next to
Ú
indicator lights up next to
Ú
with
‹‹
appears in
‹‹
Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the chapter "Basic settings".
Note: The cook time can be changed or cancelled for
any element:
Touch the Timer key several times until the
the desired element lights up. Adjust the cook time with
the
or
key, or deactivate it by setting the the timer
@
A
value to
.
‹‹
The kitchen timer
You can use the kitchen timer to set a time of up to
99 minutes.
This works independently from the elements and from
other settings. This function does not automatically
switch off an element.
Setting the kitchen timer
The kitchen timer can be set in two different ways:
1.
If an element has been selected, touch the Timer
key twice.
If not element is selected, touch the Timer key.
The
indicator lights up over kitchen timer.
Ú
appears in the timer display.
Touch the
or
@
2.
displayed.
key = 10 minutes
@
key = 05 minutes
A
Set the desired time using the
3.
The timer starts to count down after a few seconds.
Changing or cancelling the kitchen timer
Touch the Timer key repeatedly until the
lights up over kitchen timer. Adjust the time using the
or
A
key. To cancel set the timer to
Once the time has elapsed
A beep sounds. The timer display shows
10 seconds the indicators turn off.
Touch the Timer key to turn off the indicator and the
@
beeping.
for
key. The basic settings are
A
or
key.
@
A
Ú
‹‹
.
‹‹
indicator of
Ú
‹‹
indicator
@
. After
13

Publicité

loading

Ce manuel est également adapté pour:

Nit5469ucNit5068uc