Bosch NIT5668UC Mode D'emploi page 10

Getting familiar with the appliance
In this section we describe the control panel, elements
and displays.
Page 2 contains a list of models and dimensions.
Control panel
Touch keys
Main switch
On/Off
Select element
$
Adjust settings
@ A
Child safety lock
Panel Lock
Timer functions
Timer
SpeedBoost
Speed Boost
The elements
Element
Single element
$
Use only cookware suitable for induction cooking; see the section ~ "Cooking with Induction"
Residual heat indicator
The cooktop has a residual heat indicator for each
element. This indicates that an element is still hot. Do not
touch an element while the residual heat indicator is lit
up.
The following are shown depending on the amount of
residual heat:
Display : High temperature
•
▯
Display : Low temperature
œ
▯
If you remove the cookware from the element during
cooking, the residual heat indicator and the selected
heat setting will flash alternately.
10
function
®
Always use cookware of a suitable size.
Display icons
Indicates active function
Ú
Cooktop ready
‹
- Power levels
‚ Š
SpeedBoost
›
Residual heat
• / œ
Timer
‹‹
Touch control zone
When you touch a symbol, the corresponding function
will be activated.
NOTICE: Always keep the touch control zones clean
and dry. Moisture and dirt can affect proper functioning.
When the element is switched off, the residual heat
indicator will light up. Even after the cooktop has been
switched off, the residual heat indicator will stay lit for as
long as the element is still warm.
-
‚ Š
function
®