Publicité
Les langues disponibles
Les langues disponibles
TDC Trolley Installation (continued)
Attach the Track to the Header Bracket and Hang the Operator
1.
Align the track with the header bracket.
2.
Insert the clevis pin through the track and
header bracket holes. Secure with the fasteners.
3.
Swing the operator up and ensure the operator
is level.
4.
Secure the operator using the appropriate
fasteners and locking hardware to support the
weight of the operator.
HARDWARE
Clevis Pin (1)
Keeper Rings (2)
WARNING
To avoid possible SERIOUS INJURY from a falling
operator:
•
Fasten the operator SECURELY to structural
supports of the building.
•
Concrete anchors MUST be used if installing ANY
brackets into masonry.
B
14
A
B
A
Publicité
