Pioneer X-HM15-K Mode D'emploi page 36

10 Additional information
• Do not let the signal surface of discs get scratched or
dirty.
• Do not attach pieces of paper or stickers to discs. Doing
so could warp discs, making it impossible to play them.
Also note that rental discs often have labels attached to
them, and the label's glue may have oozed out. Check
that there is no glue around the edges of such labels
before using rented discs.
About specially shaped discs
Specially shaped discs (heart-shaped, hexagonal, etc.)
cannot be played on this unit. Do not attempt to play such
discs, as they could damage this unit.
36
En
Auto power off setting
Long press the  on the unit for 3 seconds to switch auto
power off setting ON/OFF.
• The operation can be conducted using only the  on the
unit.
• No need to set this using the remote control.
• Initial setting is set to ON.
Note
• When the auto power off is set to ON, "APD ON" will be
displayed on the main display.
• When the auto power off is set to OFF, "APD OFF" will be
displayed on the main display.
Restoring all the settings to the defaults
Use the steps below to restore the all settings to their defaults.
Press  STANDBY/ON to turn the power on.
1
2 Press CD on the remote control or INPUT on
the main unit repeatedly to select CD input.
Press  OPEN/CLOSE to open the disc tray.
3
Press  STANDBY/ON on the unit for
4
3 seconds while pressing .
• "DEFAULT" is displayed while the settings are being
restored. Power is turned off.
• No need to set this using the remote control.