Publicité
Les langues disponibles
Les langues disponibles
Spray Arms
Check whether the holes for the upper and lower spray arms are
clogged. If there is any clogging, remove the spray arms and
clean them under running water.
You can remove the lower spray arm by pulling it upwards, while
the upper spray arm nut can be removed by turning the nut to
the left.
Be sure that the nut is perfectly tightened when refitting the
upper spray arm.
Cleaning The Impellers
Clean the impellers at least once a week for the machine to operate efficiently.
Lower Impeller
Check if the holes on the lower impeller (1) are clogged. If they are clogged, remove, and clean the
impeller. Pull the lower impeller up to remove it (A, B.)
Upper Impeller
Check if the holes on the upper impeller (1) are clogged. If they are clogged, remove, and clean the
impeller. Turn its nut to the left to move the upper impeller (A, B)
Make sure that the nut is tightened well when installing the upper impeller.
27
Publicité
