Adjustable Top Rack
These racks are designed to increase the capacity of the top rack. You can place your cups
•
and glasses on these racks. Thanks to the adjustable feature of the racks, you can place
glasses of different sizes under the racks.
Height adjustment spacers mounted on the basket allow racks to be used in 2 different positions.
•
You can also place long knives, forks, and spoons on these racks horizontally to ensure they
•
do not block the movement of spray arms.
The top basket horizontal wire, located on the top basket, allows you to place your plates and
bowls where required. Also, you can wash kitchenware such as pots and pans by closing the
horizontal wire.
NOTE: Bringing the wires to the horizontal position by holding them from the tips may cause them to
bend. Therefore, it will be appropriate to bring the middle wires to a horizontal or vertical
position by holding them from their stems and pushing.
NOTE: Make sure that both levers catch in the same height position.
The basket height adjustment mechanism on the top
•
basket of your machine is designed to let you adjust the
height of your top basket upwards or downwards, without
removing it from your machine when it is full and to
create large spaces at the top or bottom area of your
machine, as needed.
Basket of your machine is set to the upper position in
•
factory settings. In order to raise your basket, hold it
from both sides and pull it upwards. In order to lower it,
hold it from both sides again, and leave it.
18