Publicité
Les langues disponibles
Les langues disponibles
Hi-Temp Options
When this option is selected, both the water temperature and the washing time are
increased.
Extra Fast Option
Select the Extra Fast option to decrease the duration of a program, providing more economical
water usage.
Extra Dry Options
The machine changes the water temperature from the value described for each different
program and the extra dry is performed.
Half Load Options
It is used to operate the machine without loading it completely.
1. Load your dishes in the machine as you like.
2. Turn the machine on with On/Off key.
3. Select the desired program and press the Half Load key. The Half Load indicator
will light on the display.
4. Press Start/Pause key to start the selected program and close the door of the machine.
5. With the Half Load function you can save power while using the lower and/or upper baskets of the
machine.
Programming The Washing Time
Delay Timer
If an economical electricity tariff is applied in your region, you can use the Delay Timer function to
wash your dishes during appropriate hours. You can delay the start of the selected program until
19 hours. Delay Timer cannot be set after the program starts.
1. Press the Delay Timer function key after selecting the washing program and other auxiliary
functions.
2. Once you press the Delay Timer key, Display will show "1h" and Display will show program
number, program duration and delay time alternately for 2 seconds.
3. Set the desired time by pressing the Delay Timer key. Time will increase with the increments
of 1 hour every time you press the key.
4. In order to start the selected program with delay, Start/Pause key should be pressed and the
door of the dishwasher must be closed within 4 seconds.
NOTE: The use of Delay Timer has a special case.
Assume that you have selected a program with delay and pressed Start/ Pause key. After a length
of time, you have opened the door of the machine. If the door of the machine is closed within 4
seconds, the machine resumes on for the duration of the delay timer. If the door is not closed within
4 seconds, the machine pauses the delay timer. In this case, to continue the delay timer, the door
must be opened, the Start/Pause key must be pressed and the door must be closed again within 4
seconds after the Start/Pause key is pressed.
Changing the settings while Delay Timer is enabled
While the Delay Timer function is activated, you cannot make changes in the washing program,
auxiliary functions or the duration of delay time.
i. Program and auxiliary functions cannot be set/changed after the program has started.
24
Publicité
