Publicité
Les langues disponibles
Les langues disponibles
MANAGING USERS
When adding and deleting users, the flashing numbers appearing are those numbers that are available and usable to assign to a new user (max.
250 users).
Before registering the users, make sure the AF radio card is plugged into the connector (see the paragraph called CONTROL DEVICES).
ENTERING USERS WITH AN ASSOCIATED COMMAND
Select U1. Press ENTER to confirm. ❶
Select a command to associate to the user: The commands are:
- 1 = step-step (open-close);
- 2 = - sequential (open-stop-close-stop);
- 3 = only open;
- 4 = partial opening/pedestrian.
Press ENTER to confirm... ❷
... a number from 1 to 25 will blink for a few seconds. Send the code from the transmitter or other control device, such as, a keypad selector or a
transponder.❸
Mark the user entered in the table LIST OF REGISTERED USERS.
U
i
From the docs.came.com portal, download the L20180423 module for registering the users.
DELETING SINGLE USERS
Select U2. Press ENTER to confirm. ❶
Use the arrow keys select the number of the user you wish to delete. Press ENTER to confirm...❷
The Clr wording will appear to confirm the deletion. ❸
U
2
2
2
2
5
C l
Publicité
