Publicité
Les langues disponibles
Les langues disponibles
C A R E A N D C L E A N I N G
Container
To prepare your new machine for initial use, follow the procedure below. This will
clean the unit and break in the motor.
Before using the Variable Speed option, always begin with the Variable Speed
Dial pointing to the Stop Symbol ( ) at the top of the dial.
1.
Fill the container half full of warm water and add a few drops of liquid
dishsoap to the container.
2.
Snap or push the complete 2-part lid into the locked position.
3.
Perform one of the following procedures:
•
Variable Speed:
a.
Rotate the Variable Speed dial to 1.
b.
Press the Start / Stop switch.
c.
Slowly increase variable speed to 10.
d.
Run the machine for 30 to 60 seconds.
e.
Rotate the Variable Speed dial to the Stop Symbol ( ) at the
top of the Variable Speed dial.
•
Program
a.
Rotate the Variable Speed dial to the Cleaning ( ) program
symbol. The program will stop automatically when complete.
b.
After the program stops, rotate the Variable Speed dial to the
Stop Symbol ( ) at the top of the Variable Speed dial.
4.
Rinse and drain the container.
Lid, Lid Cap and Tamper
Separate the lid and lid cap. Wash parts in warm, soapy water. Rinse clean under
running water and dry. Reassemble before use.
IMPORTANT: To ensure continued and effective performance, do not put the
container, lid, lid cap or tamper in the dishwasher.
20
Publicité
