Publicité
Les langues disponibles
Les langues disponibles
O P E R AT I N G I N ST R U C T I O N S
Take proper care when handling and processing hot ingredients and
7.
when making hot soup and sauces.
8.
Due to the machine's speed, processing times are much quicker than with
standard appliances. Until you are accustomed to the machine, time things
carefully to avoid over-processing.
9.
After pressing the Start / Stop switch to stop the cycle, wait until the blades
stop completely before removing the lid or container from the motor base.
Dry-Blade Container
Before using this container with programs or the Variable Speed option, always
begin with the Variable Speed Dial pointing to the Stop Symbol ( ) at the top of
the dial.
If purchased, your dry-blade container should be used only for hard, dry
materials, such as grain, and for kneading dough.
1.
Load the container before placing it on the motor base.
2.
Fasten the 2-part lid securely. Always use the complete 2-part lid when
blending (unless the tamper is inserted through the lid cap opening).
3.
With the motor off, set the dry-blade container on the motor base by
aligning it over the centring pad. Never attempt to put a container onto
an operating motor base or to operate a motor base without a container
properly in place.
4.
To begin, make sure that the On / Off switch is in the On position.
5.
Activate the machine by pressing the Start / Stop Switch. Your container
will shift and align itself.
•
Variable Speed - slowly increase the Variable Speed to the desired
speed.
•
Programs (Pro-750 only) - Rotate the dial to the left of center to the
desired program.
To Avoid Possible Burns, Never
Start on Speeds Above 1 when
Processing Hot Liquids.
Escaping steam, splashes or contents
may scald.
To secure the contents, lock the lid and
lid cap securely in place prior to operating
the machine.
Always start on Variable Speed 1 and
slowly increase to 10.
CAUTION
19
Publicité
