Publicité
Les langues disponibles
Les langues disponibles
7500, Pro-300 and Creations Elite Models
5
On/Off Switch:
1.
The On/Off (or Power) Switch is on the right-hand side of the machine base.
The On/Off Switch controls the power to the machine. BEFORE moving the
On/Off Switch to the On (I) position, make sure the Start/Stop Switch
is in the Stop ( ) position and the Variable Speed Dial is to the far left,
pointed at number 1. Move the On/Off Switch to the Off position whenever
the machine will be left unattended.
On/Off Indication:
2.
When the Pulse ( ) and Start ( ) symbols brighten, the machine is plugged
in, the On/Off Switch is powered On and power is flowing.
Start ( )/Stop ( ) Switch:
3.
Before blending, make sure that the Variable Speed Dial is pointed at 1.
Lifting the Start/Stop Switch to the Start Position ( ) initiates the rotation
of the blades and begins the blending process. Pressing down on the Start/
Stop Switch to the Stop Position ( ) will stop the blending process.
Variable Speed Dial:
4.
The Variable Speed Dial selects blade rotation speeds from 1 to 10 (low to
high). Always begin the blending process with the Variable Speed Dial
set to 1. Make sure that the On/Off Switch is in the On (I) position. Move the
Start/Stop Switch to the Start ( ) position. Rotate the Variable Speed Dial
to the desired speed setting. To stop the machine, rotate the Variable Speed
Dial back to 1 and move the Start/Stop Switch back to the Stop ( ) position.
If the Variable Speed function is not working and the blades only rotate at
the lowest speed (Variable Speed 1) the blender must be reset. Refer to
Troubleshooting on Page 22 for instructions.
Pulse Switch ( ):
5.
Pressing down on the Pulse Switch will cause the machine to blend at the
speed setting shown on the Variable Speed Dial for as long as the Pulse
Switch is held down.
CO N T R O L PA N E L
2
4
3
1
11
Publicité
