Vacmaster Captura UB0302E Manuel D'entretien Et D'utilisation page 26

PROBLEM
cleaned or replaced.
Poor job of dirt
pick-up.
The hose is worn.
The connection hose is worn.
The brushroll is worn.
The belt is worn or broken.
Dust bag or dust bag chamber
cover is not installed correctly.
Dust escapes
installed incorrectly.
from vacuum.
The dust bag is worn or broken. Check and replace the dust bag.
Handle is in fully upright position.
Wrong mode selected.
Brushroll does
not turn.
Brushroll is jammed.
Brushroll is not installed
correctly.
POSSIBLE CAUSE
page 20 or 21.
Replace the hose. Purchase online at
www.vacmaster.com or call 1-866-384-
8432.
Call 1-866-384-8432 for assistance.
Call 1-866-384-8432 for assistance.
Call 1-866-384-8432 for assistance.
Check the dust bag or dust bag
chamber cover for correct installation
place. Follow instructions on page 19.
installation. Follow instructions on page
21.
Move handle from the fully upright
position.
Press the switch to the "II" position to
start the brushroll.
Remove obstruction. Follow
instructions on page 22.
Call 1-866-384-8432 for assistance.
-26-
SOLUTION