Vacmaster Captura UB0302E Manuel D'entretien Et D'utilisation page 13

BRUSHROLL STATUS INDICATOR LIGHT
Brushroll Status
Indicator Light
Green, Continuous
Red, Continuous
No Light
1. Place the vacuum cleaner in the upright locked position.
2. Press the hose release button and pull up to release the lower hose end from
the lower hose connection.
Hose Release Button
Status
The brushroll is spinning and working as it should.
There is a jam in the brushroll area. Turn off and unplug
the vacuum, and remove any blockages in the nozzle.
The brushroll motor is overheated. Turn off and unplug the
vacuum. Check and clear the air path to make sure it is
free of obstructions. Check and change the dust bag if full.
Then plug in vacuum and turn it on.
The brushroll is off.
2
1
Brushroll Status
Indicator Light
-13-