Vacmaster Captura UB0302E Manuel D'entretien Et D'utilisation page 16

Thermal Protector
This vacuum cleaner has a thermal protector which automatically trips to protect
motor, the thermal protector turns the motor off automatically. This allows the
motor to cool in order to prevent possible damage to the vacuum cleaner.
Turn the vacuum cleaner off and unplug the power
cord from the outlet to allow the vacuum cleaner to cool and the thermal protectors
to reset.
CAUTION
Always return the vacuum cleaner to the upright position before using the hose
and accessory. Failure to do so may result in overheating of the brushroll motor
and can cause the thermal protectors to trip.
Check for and remove clogs, and replace dust bag if necessary. Also check and
cleaner.
This vacuum cleaner has a By-Pass Valve which prevents motor overheating and
damage. The valve opens to provide cooling air when a clog prevents normal air
rushes through the valve opening.
check and install new dust bag if needed.
The By-Pass Valve may open when using attachments or when
Brushroll Reset
The brushroll has built-in protection against motor damage should the brushroll
jam. If the brushroll slows down or stops, the brushroll overload protector shuts
off the brushroll motor and the brushroll status indicator light emits a red light. The
vacuum cleaner suction motor will continue to run.
-16-