Vacmaster Captura UB0302E Manuel D'entretien Et D'utilisation page 23

Removing Clogs
WARNING
Disconnect electrical supply before removing clogs. Failure to do so could result
in electrical shock or personal injury.
If there is noticeable abnormal noise when using the vacuum or the suction power
suddenly drops, it is necessary to check the hose for clogs.
Frequently check the air path to make sure it is free of obstructions.
1. Press the hose release button and remove the hose from the main body.
Release the other end of the hose from the lower hose connection.
INSTRUCTIONS (page 7).
Hose Release
Button
-23-
GENERAL ASSEMBLY