Argo DELUXE 9000 UI Manuel D'utilisation Et D'installation page 39

BUTTONS DESCRIPTION
1. ON/OFF button
Press this button to turn the unit on or off. This button can also be used to reset the timer and the SLEEP function.
2. MODE button
Press this button to select the operating mode: AUTO (automatic) - COOL (cooling) - DRY (dehumidification) - HEAT
(heating) - FAN (ventilation), according to the sequence below:
3. TIMER button
With the air conditioning on, press this button to deactivate the TIMER function, with the air conditioning off to
activate it. When the button is pressed, the display will show the words "ON (OFF)" flashing. Press the "+" and
"-" buttons to set the timer, with each press the selection interval will increase or decrease by 0.5 h. The range that
can be set is 0.5-24 h. Press the "TIMER" button again to activate the function, the "ON (OFF)" symbol will stop
flashing. If the "TIMER" button is not pressed within 10 seconds while the "ON (OFF)" symbol is flashing on the
display, the TIMER function will be cancelled. If the TIMER function is active, pressing this button will deactivate it.
4. HEAT button
Press this button to activate the heating mode.
5. COOL button
Press this button to activate the cooling mode.
6. SPEED button
With the unit turned on and in COOL or HEAT mode, press this button to select the fan speed, according to the
sequence below:
V 11/23
5
4
9
8
6
1
2
3
7
10
39