Sabo 54-VARIO Livret D'entretien page 47

Width
Height
Wheels front / rear
Mount front
Mount rear
Sound power level
Guaranteed sound power level;
measured according to 2000/14/EC
Sound pressure level
Sound pressure level emissions at the operator's position;
measured according to EN SO 5395-2
Measurement uncertainties; according to ISO 4871
Vibrations
Vibrations on the lawnmower's handlebar;
measured according to EN ISO5395-2
Measuring inaccuracy; according EN12096
21 ORIGINAL SPARE PARTS
Motor oil
Roller bearing grease
Spark plug To be ordered from B&S using the number 692720
Air filter insert To be ordered from B&S using the number 795066
Pre-filter To be ordered from B&S using the number 796254
Deflector
Conversion kit for mulching system
Cutter bar
600 mm
935 mm
Ø 210 mm / Ø 210 mm
Cone ball bearings
Needle bearing
L = 98 dB(A)
wa
L = 86 dB(A)
pA
a = 5 m/s
hW
2.5 m/s
SA24208
SAA11300
SA592
For safety reasons, the cutter bar must
always be replaced by an authorised
workshop.
This workshop has the respective spare part
numbers for the cutter bar available.
1.5 dB
2
2
SA609
13