Publicité
Les langues disponibles
Les langues disponibles
BB200 - NLFREN - v1.0 - 22112016
MACH
EN
15 Other function settings
15.1 Minimum value display settings
After select minimum value display, even wheel imbalance value less than setting value, result will be display 0(zero),press FINE
key, will be display fact imbalance value.
Press STOP and D key, ect figure 15-1, denotation imbalance value less than 5 gram, display is 0g (zero gram).
Press b+ or b- key setting minimum value, are 5 and 10 and 15 gram three distinctions.
Press a+ key to save settings and enter next step.
Fig. 15-1
15.2 Key-tone clue on function settings
This function can turn on or turn off key-tone, even turn on this function, every time press key, system will be emit a "di" of
tone, even turn off this function, press key not tone. From 15.1 press a+ enter settings, ect figure 15-2,right side display ON
denotation function on, display OFF denotation function off.
Press b+ or b- key, function will be switch between "ON" and "OFF".
Press a+ key to save settings and enter next step.
Fig. 15-2
15.3 Display monitor brightness settings
This function will follow use environment and user need, setting display brightness.
From 15.2 press a+ enter settings, ect figure 15-3, right side display brightness grade, altogether is 8 levels, level 1 is darkest,
level 8 is brightest, default is level 4.
Press b+ or b- key, function will be switch brightness levels.
Press a+ key to save settings and enter next.
Fig. 15-3
16 Machine self test function
This function will check all kinds input signal whether right working and provide gist for trouble analyses.
16.1 LED and indicator light check
Press D key, whole LED and indicator light all turn on, this function can be check LED or indicator light whether appear
damage, press C key to exit, after about 5 seconds display ect figure 16-1,enter position sensor check.
Press C key to exit.
Fig. 16-1
57
Publicité
