Trebs Comfortice 99243 Mode D'emploi page 34

Do not tilt, gag the openings, seal the openings with preservation membrane, inversion and
so on. If the coolant cannot be successfully frozen, or unilateral frozen, the soft ice cream
will not be made successfully.
2. Install the outer bowl on the support as the picture below.
3. Take out the inner bowl from the refrigerator, and install it into the outer bowl as the
picture below

Please wear gloves or use a dry cloth when installation. Furthermore, please don't touch
the inner tank.

Installation cautiously and slowly.

Make sure that the inner bowl is correctly installed on the out bowl.
4. Install correctly the paddle with the blender into the inner bowl.
5. Install the lid onto the out bowl.