Teac TASCAM DR-10C Mode D'emploi page 9

Names and functions of parts
Front
1
2 3 4 5
1 Infrared port transmitter and receiver
Using infrared beam transmissions between
multiple DR-10C units, the built-in clock time
and function settings can be transmitted and
received. (See "Using infrared transmission" on
page 15.)
2 MENU button
i When the Home Screen is open, press the
MENU button to open the Menu Screen.
When the Menu Screen is open, press the
MENU button again to return to the Home
Screen.
i When a setting item is shown, press the MENU
button to return to the Menu Screen.
i When the Home Screen is open, while pressing
and holding the MENU button, press the .
[j] button to enter infrared transmission
mode. When in infrared transmission mode,
press the MENU button to return to the Home
Screen.
3 . [j] button
i During playback or when stopped in the
middle of a file, press the . [j] button to
return to the beginning of the file.
i Press when located at the beginning of a file
to skip to the beginning of the previous file.
Press and hold this button during playback to
6
search backward.
i When the Menu Screen is open, press the
. [j] button to select a menu item.
i When a setting item is shown, press the .
[j] button to move the cursor left.
i When inputting a file name, use this to select
characters.
i When the Home Screen is open, while pressing
and holding the MENU button, press the .
[j] button to enter infrared transmission
mode.
4 / [k] button
i During playback or when stopped in the
middle of a file, press the / [k] button to
skip to the beginning of the next file. Press and
hold this button during playback to search
forward.
i When the Menu Screen is open, press the
/ [k] button to select a menu item.
i When a setting item is shown, press the /
[k] button to move the cursor right.
i When inputting a file name, use this to select
characters.
5 7'9 [ENTER] button
i When the Home Screen is open, press the
7'9 [ENTER] button to start file playback.
i When the Menu Screen is open or a setting
item is shown, press the 7'9 [ENTER]
button to confirm the selected item. Use this
also to respond to a confirmation message.
6 Display
Shows a variety of information.
Rear
7
Battery compartment and cover
7
Install one AAA battery in this compartment to
power the unit.
TASCAM DR-10C
9