Teac GF-350 Guide De Mise En Marche

Z
Quick-Start Recording Guide
This Guide provides you with the simplest way to use this equipment for recording.
Of course, we strongly suggest that you consult the Owner's Manual for complete details and important safety information.
4
Place the record on the turntable.
Before use, completely loosen the
transportation screw by turning it
clockwise with a coin and remove the
stylus guard.
1. Select the proper speed.
2. Gently push the clamper to the right
to release the tone arm.
1
Press the POWER switch to turn
the unit on.
Manual track division
It is possible to divide the recording into tracks while recording.
While the recording is taking place, press the TRACK INCREMENT
button. The current track number will be incremented by one.
5
Press the RECORD button.
The red indicator on the RECORD
button lights.
The unit enters record pause mode.
In record pause mode, "REC"
indicator blinks and the J indicator
lights on the display.
2
If the PHONO indicator doesn't
appear in the display, press the
PHONO/AUX button once or
twice to select PHONO.
About CD-R/CD-RW discs
Please use CD-R and CD-RW discs bearing the "DIGITAL AUDIO"
mark. This unit CANNOT RECORD CD-R and CD-RW discs
designed for computer systems.
GF-350
6
Gently lower the tone arm onto
the edge of the record (or the
track to be recorded).
When the turntable is stopped, the
PLAY or the PAUSE buttons will not
work and you cannot start recording.
7
Press the PLAY or the PAUSE button
to start recording.
When the rotation of the turntable
stops, the recording will stop
automatically.
To prevent unwanted noise from the
tone arm being recorded, stop the
recording manually by using the STOP
button.
3
Load a recordable CD-R or CD-RW
disc into the unit.
TEAC CORPORATION 0307 . MA-0955C
CEC6P12013600-C